UltraJog CNC
Wireless handwheel (MPG) with phone and tablet dashboard
Price in USD. Ships to US addresses only. Shipping and tax are calculated at checkout.
- Machined 6061 knob on a 600 P/R optical encoder
- Direct Wi-Fi to the Z1, about 30 ms round trip
- Browser dashboard for phone and tablet, nothing to install
- One-tap probing: corners, hole and boss centres, top surface
- Built-in battery with USB-C charging
- No changes to your Z1
A handwheel for touching off, edge-finding and squaring up
UltraJog CNC puts a real manual pulse generator on your Makera Z1. Turn the knob and the selected axis moves in fixed steps of 0.001, 0.01 or 0.1 mm per click, as smoothly as the Z1 allows.
It connects straight to the Z1's own Wi-Fi hotspot, so there's no router, cable or laptop in the loop. Any phone or tablet browser shows live position, feed, spindle, tool and battery, and handles zeroing, probing, tool changes and soft-limit recovery. With a touch probe in the spindle, one tap finds a corner, a hole or boss centre, or the top surface and sets the work origin.
Safety comes first: jogging is off at power-up, the wheel locks while a job or tool change runs, and motion stops if the link goes quiet.
- UltraJog CNC handwheel, assembled and tested, battery installed
Final box contents are confirmed before pre-orders ship. Charges from any USB-C charger.
| Mechanical and controls | |
|---|---|
| Housing | Ø102 × 44.8 mm, PETG |
| Knob | Ø69 × 9 mm, machined 6061 aluminium |
| Encoder | Optical, 600 P/R |
| Step per click | 0.001 / 0.01 / 0.1 mm |
| Button | Axis, step size, jog on/off, soft-limit unlock |
| Electrical and wireless | |
|---|---|
| Controller | ESP32-S2, Wi-Fi 2.4 GHz |
| Link | Z1 hotspot (about 30 ms) or home network |
| Battery | 1200 mAh LiPo, USB-C charging |
| Feed limit | X/Y 1200, Z 600 mm/min |
| Updates | One tap from the dashboard |
Works with: Makera Z1 on its stock firmware. Nothing is installed on the machine.
Dashboard: any modern phone, tablet or computer browser on the Z1's Wi-Fi (or your home Wi-Fi in home mode).
Not supported: other Makera models and other machines.
US only. UltraJog CNC is sold and shipped within the United States only.
Pre-order batches. UltraJog CNC is built in small batches. Batch 1 is the first 12 units and ships December 10, 2026. Batch 2 ships January 10, 2027. Units are assigned in the order payments arrive; your confirmation page shows your batch and ship date. If you order several units and Batch 1 runs out partway, the rest ship with Batch 2.
Questions before you order? See the FAQ or the setup guide.